A roll cage pic and question

Hey all!! Thanks for the input. I knew that just didnt look right :sign6: . I bought the kit from Chassis Engineering (10 point) .The reason I bought it from them is that they are only 70 or so miles from me and I saved on shipping by picking it up. Since I've 1st posted this I have been on the phone with them and they are going to bend a new roof bar for me (To my measurements) and even give me new front bars as well, since I cut mine. All no charge...So I give em' A+ for customer service.

Guitar Jones.... As for buying a cage...The only BENT pieces are the Main Hoop, Roof hoop and for a 12 or 14 point the front frame rail bars. Everything else is straight tubing... So, I would suggest just buying it "locally" and save the shipping. A any competent shop with a tubing bender should be able to get it done for you. PS You'll need 2 long (7-8'or so) straight tubes if you want the rear "down tubes" to reach all the way into the trunk area. I dont think that will come standard in a "Kit" Ask before you buy... Ask, How I know :-)

KrabbySniper Yes, I have the 06' NHRA Rule Book. Last thing I wanna do is, not pass Tech at the track!! :headbang: