360 cam / valve train help / choices
Thanks for the help.
I'll continue to look for my camshaft and springs.
If need be I could purchase the proform rocker assy. for 230.00 Hoping to not need them.
Are they any good? Cheapest I could find.
Junkie, i know a friend that ran the Proform rockers on his BB, they did pretty good holding up, but it was a track car only, on the street, you either need a good quality aluminum (pricey), or a decent stainless, i think Procomp (not Proform) is makeing a stainless rocker & shafts for the SB & BB mopars, the whole kits like 350.00 for everything, i've had these rockers in my hands & i will say they are nice. You really should run an adj. valvetrain with any high/fast rate lift cam & higher spring pressures.
I ran those KB107s in a 360, as said, there around 9.8 with a stock CC head, unless you plan on running good fuel, i wouldn't start milling the heads & jacking with that stuff, even if you try & achieve say 10.2/10.3 comp., you'll just be better off staying with 9.8, there won't really be any power gain that you can feel, but you chance detination, my choice for a cam would be either the Lunati 60403 or the XE274H, maybe even the 275HL.