Make sure the deck hieght is set properly or it will feel rather sluggish with that cam. You're going to want at least 10:1 static and you'll need a smaller chamber than 70ccs. I'd also be seriously thinking about running a single plane M1 on it.
Block has been square decked, but I haven't mocked it up yet to see how far out of the hole yet. I have already thought about getting the heads milled to about a 64cc chamber, and using an .028" gasket, and if there out of the hole at least .020, I'll get around 10.64 static.
The car will see mainly Friday night street action as far as being street driven, I'll run a 110/93 mix.
I think it should push 425-450Hp if I can get enough compression in it. Heads are pretty much maxed out- I'll definately check that M1 out.