A tale of two Dusters
So here is the deal. I had a bugger of a time installing this addco 1-1/4" front bar because it was too short to fit above the radiator core-to-Kframe support like the pictures showed. And the only way it would fit is really low and I'm having ground clearance issues right now. I'm going to try to crank the adjusters up and see if that works. But I need a stiffer spring rate in the front for less brake dive. Shocks might help that too.. Other than that it is amazing! Much more responsive and a whole lot better transitions. It doesn't feel like it is going to scrape the ground on the outside of the turns anymore. I have a noticeable increase in grip (from less roll) even in the wet. :love7: So enough of my chatter.. here are the pics. Sorry their isn't any during the install... I couldn't hold everything and take the pics at the same time. And It was raining when I drove it so that's why everything is wet.
All the parts organized:
The underside before:
Thinking about yanking the hoops:
Holes clearanced:
Finished:
So here is the deal. I had a bugger of a time installing this addco 1-1/4" front bar because it was too short to fit above the radiator core-to-Kframe support like the pictures showed. And the only way it would fit is really low and I'm having ground clearance issues right now. I'm going to try to crank the adjusters up and see if that works. But I need a stiffer spring rate in the front for less brake dive. Shocks might help that too.. Other than that it is amazing! Much more responsive and a whole lot better transitions. It doesn't feel like it is going to scrape the ground on the outside of the turns anymore. I have a noticeable increase in grip (from less roll) even in the wet. :love7: So enough of my chatter.. here are the pics. Sorry their isn't any during the install... I couldn't hold everything and take the pics at the same time. And It was raining when I drove it so that's why everything is wet.
All the parts organized:
The underside before:
Thinking about yanking the hoops:
Holes clearanced:
Finished: