My free Duster (Look close you will see why it is free)

Here I started on my dash frame, it had a little surface rust on the backside and a few scratches on the front so I figured I would get it ready to paint. I took a red scuff pad to the inside and some rust convertor spray paint and sprayed all of the inside then I took white primer ( I know it isn't correct to paint the inside of the dash especially white but I heard somewhee that white will reflect the light better if I have work to do under the dash) and sprayed the inside with a couple of good coats. I then took a wire wheel on my drill and a some sand paper by hand and cleaned the front up and got rid of all loose paint and rust and feathered all chips out so I had a smooth surface to work with.