Anybody running 17" Cobra Bullit rims on a Duster
OK here are the pics. The first two shows the rim hitting the tubular upper control arm at full droop.
This pic shows how much more I COULD turn if the rim didn't hit the UCA.
Note the steering stop doesn't hit the LCA stop, as it should.
Here is a pic at ride height, again, the rim hits the UCA.
So, today I will mess with the cam bolts and see if I can change any of that.
If it doesn't, it seems that I will not be able to use the RMS UCA because they are too wide, more shaped like a "U". If you were to look at the Firm Feel tubular UCA, they are narrower and shaped like an "A", more or less. And it seems I will have more clearance if I use the Firm Feel UCA...
Here's the Firm Feel unit, its narrower...
OK here are the pics. The first two shows the rim hitting the tubular upper control arm at full droop.
This pic shows how much more I COULD turn if the rim didn't hit the UCA.
Note the steering stop doesn't hit the LCA stop, as it should.
Here is a pic at ride height, again, the rim hits the UCA.
So, today I will mess with the cam bolts and see if I can change any of that.
If it doesn't, it seems that I will not be able to use the RMS UCA because they are too wide, more shaped like a "U". If you were to look at the Firm Feel tubular UCA, they are narrower and shaped like an "A", more or less. And it seems I will have more clearance if I use the Firm Feel UCA...
Here's the Firm Feel unit, its narrower...