Anybody running 17" Cobra Bullit rims on a Duster

I was going to use the short (1/2"?) bump stops, but had the bolt in the stop shear through the poly when I was installing them. These did not have a square shoulder to fit the hole in the Mopar LCA, so keep that in mind. I can't remember the brand, but I'm thinking PST. Just a plain black poly piece. To me, the short dome-shaped stops aren't ideal, but are about all that's out there. Something shaped the same as the OEM piece, but shorter, would be my preference.

FWIW, I don't think your ride height looks bad at all. That's about the same as mine and it works well on the street.

On the camber, just put a straight-edge on the wheel from lip to lip, and rotate both adjusters out equally (if you can) to get the wheel straight up or slightly in at the top. That'll get you in the ballpark.

Clair