CAM SETTING???

-

THEWHITEZOMBIE

Mopars an Heavy Metal
Joined
May 22, 2004
Messages
1,552
Reaction score
48
Location
Burney Ca.
Hey guys i just got a degering wheel for my car now im ready to go!It has the instructions on it that help me out in understanding what needs to be done,but on the down side it kinda counfuses me :pale: SO in ENGLISH can u guys run me through the steps?iv looked at all the tech pages and it still confuses me!let me know some helpfull tips and tricks to do it right!make it as simple as possible!Thanks guys
MIKE :afro:
 
Did you get a degreeing kit, or just the wheel? You will need a dial indicator and a piston stop too.

I don't know how to explain the process any simpler than these articles. The first article is about cams in general. The rest explain how to degree a cam, complete with pictures. If you read through all this and still don't understand, then the best thing is to have someone actually show you how to do it.

:computer: :read:

http://carcraft.com/techarticles/116_0403_basic/

http://carcraft.com/howto/116_0310_deg/

http://www.compcams.com/Technical/Instructions/Files/145.pdf

http://www.speedshop1.com/DegreeCams.pdf

http://www.barkerengines.com/tip102302.htm

http://www.ridgecrest.ca.us/~biesiade/camdegree.htm

http://www.stcloudchampionauto.com/pdf/27_Camshaft.pdf
 
We just have Jim at Racer Brown grind the advance right into the cam and we line 'em up Dot to Dot and go.

We checked dozens of them and with the Rollmaster timing sets and a Jimmy Boy Cam it's a waste of time, never found one out by more than 1/2 degree.
 
-
Back
Top