Keep in mind I will not be using a center console and I don't care if my interior looks original or not. I made the crossmember out of 1.5x3 square tubing - not the prettiest, but it's stronger than the old one. I held the crossmember in place using the original bolt holes, and then welded it in. The lower crossmember (made of 1/4" plate) is dropped maybe 1" in the center. Overall my upper crossmember is probably 2-3" higher than the original.
The TKO is bulky in the crossmember area. The speedo cable comes out directly in line with the crossmember which could be a problem for you (I will be using the electric speedo signal and plugging the speedo cable hole).
The engine isn't in the car, so I built a jig from the K-member to hold the TKO in the right place. It made things a lot easier when dropping the trans multiple times during test fitting. If anyone is interested I'll sell the jig cheap.
If you need more pics just ask...
Scott