Anybody running 17" Cobra Bullit rims on a Duster
Mopardude318, here is my car with 245/40/18's with 6.5 backspace.I used this size tire and wheel all the way around.I had 1/4 inch spacers in the front only and the only reason for that was because of the design of the wheel.I tried the tubular upper control arms and had problems just like you are having. I finally went with 383 torsion bars and the stock upper control arms with new bushings and ball joints.As you can see from the picture the car was just about as low as you would want to go and i still got all the camber and caster i needed when we went to align it.In the rear i had super stock springs with Dr Bobs lowering spring perch hangers in the front and Just Suspension adj shackles on the back end.My car handled like it was on rails,It was very easy for me to keep up with the Vettes and Mustangs in the corners running around my neighbor hood.400 plus HP and a good 4 speed helps in that dept to. LOL!! Just my opinion is unless you are running alterkation etc. etc. I think you can acheive pretty much the same result with the Right stock set up.