If you are willing to run enough gear and converter it should be possible. Your going to be limited by how many RPM's you can turn. Would be easy with a 100 HP shot of NOS.
I have a 4.10 gear and a low gear set (2.74 1st, 1.54 2nd) for the transmission. The low gear set provides more torque multiplication than the regular 904 2.45 gear set and gets the revs up faster.
Was looking at an econo-type torque converter but that may not be enough. Torque peak with either cam I'm looking at is around 4,500, so I'd likely benefit from a 3,500 + converter. The higher the stall though, the higher the cost.
Nitrous may be a possibility once I get it up and running well.