Advice Appreciated

Gettin' close to spring and rebuild time.
65 Dart GT w/273 4bbl/904 from factory.

The machinist doing the rebuild has a good rep' and is a Mopar Man (69 RR).
The engine will be 30 over keeping the 10.5 comp'ratio and heads will have hardened seats. Has Eddy 600cfm on stock manifold. I have a new 2000 rpm stall convert' and want a slightly hotter cam.

I will make a few runs at the 1/8 mile track just to do it but will be mainly street cruising.

Has 14" rims and the dummy here ( me ) forgot to check the rear end ratio when it was on the rack ( probably stock ).

Any advice on cams and head work will be appreciated. THX