Winter time model building thread.

Here's one fresh off the work bench. Not a bad kit but not a great one either. The rear valance and bumper had to be filed down a bit to get the rear bumper to fit correctly. The belt for the supercharger belt attached to the water pump and not the crankshaft, so I used a correct set up from the parts box. The injector scoop can't be glued on the blower because it won't clear the hood when you take the hood on and off.The front bumper/grille assembly doesn't fit correctly unless you file the top of the front valance down a bit. I used a set of mags from the parts box and also added the rear slicks. I also used an exhaust from the parts box. Aside from the few glitches I am happy the way it turned out.