Radiator/cooling issue (continued)

Well, since Putfile is being stupid, I went ahead and attached a pic.

You can see the two B&M supercoolers at the lower front edge of the core support. I used some 1/16 rolled angle steel to make the bracket. There is also a matching top bracket that spans the core support and is mounted on two 1/4-20 studs (not pictured here). It's rock solid and sit about 2 inches off the radiator so it shouldn't affect airflow significantly.

On the fenderwall you can see my dual remote bypass oil kit. I've finished dressing up the lines, so the hoses are all pretty now. Capacity is now 7.5 qts with a stock pan (baffles installed) and the cooler.