Barracuda finally out of the garage

I cut all the unibody metal out and made my own 2x4 frame then welded it to the body. The rear tri 4 bar i made is something i pieced together using different companys. The front suspension is mustang ii style. I started with heidts control arms and made my own crossmember and upper a-arm mounts because i needed a narrower track width, which is now 54". I am using qa1 coilovers. Ive got a 5.7 hemi and i am installing an xv motorsports carb kit. I was originally going with a t-56 but now im leaning towards a 727 auto. At first this project started out to be just some decent wheels and a paint job, but ounce i realized i couldnt get the stance i wanted with the factory suspension, it went a whole nother direction. As far as ride height, The front rocker sits about 4.5 inches from the ground and front crossmember about 5" off the ground, aslo nothing will hang below the rocker. It sits as low as my lowered Magnum, so i shouldnt have to many bottoming out issues. I will post some more picks later.