TTi Headers and 4 speed

I made a NEW Bellhousing bracket where the pivot ball bolt on so it would work, but these problems existed in conjunction with using a QUICKTIME BELLHOUSING I cut off the Bracket that came with the QUICKTIME KIT and made a new piece then welded it to the lopped off bracket. It needed to move about 5/8" toward the back of the car away from the engine. Otherwise I did not have enough clutch adjustment and the linkage would hit the header, and NO WAY would you be able to use a STANDARD SIZE STARTER, MINI IS ONLY WAY, Nothing else had to be modified........except the Z BAR bracket at the BELLHOUSING.