Suspension Refresh

Here are a few things I can think of off the top of my head. Its been a few years since I did mine.

ball joint splitter/pickle fork
3/4, 7/8, 15/16, 1" off set box wrenches work best
BFH hammer
3/4" socket to unload the torsion bars

You will need to fabricate a tool to press the bushings into the upper control arms. I used a 3/4" piece if threaded rod with nuts and washers, about 6 " long.

I would address the brakes at the same time if the aren't pretty new. At least bleed them. You could hang the drum maybe but it will just be in your way.

Hope this helps some.