Hydraulic clutch set up issue

i used a CNC slave i bought at speed way motors .com,,and a wil wood clutch master,, i still have a little trouble getting ion to 1st gear after it warms up,,, i am going to pull out my pedals,,they have a lot of play,, and see if i can cure that problem,, it may take up the needed travel i need its only mynute,,, if it doesnt,, i will drill a hole in the A body fork 1 inch away from the factory orignal linkage hole,, going towards the tranny,, this will be the same as having a shorter fork,,meening more travel quicker,,then adjust my pedal stop,,,,ALWAYS remeber to add a pedal stop on a hyd clutch, so you dont over stroke the master cylinder,, i will post a couple pics,, if u need more ill e mail a file,,thanks hope this helps you,the threaded rod i used is grade 8 stainless