Hydraulic clutch set up issue
the slave cyl is mounted at the rear with a heim joint ,mounted in a position that swivels up and down,,and rotates around,,then the front of the slave is mounted with the factory half ball in the fork end,,so i think there is enough movement to prevent binding,,
the master is a 3/4 bore,, and the stroke of the master is either 1 1/4 inch or 1 3/8 inch,, i for get,, wilwood also makes a slave looks just like the one im using but is black,, and costs more,, it is a puller type slave not a pusher,,,
go to speedwaysmotors.com and search the slave cyl and search the wilwood clutch master cyl,,,
