72 Demon now underway
Tore into the tail end to get the tail light panel, trunk extensions, and trunk extension caps out. I'm keeping the trunk floor loose until everything goes back together; it is easier to work underneath without it.
Continuing with the fabrication and welding tasks, here is pic of the Street Lynx bar welded in place. I had to fabricate some shims to close gap between the bracket and frame rails as the cars frame rails were over 1/8" wider than the Street Lynx.
Tore into the tail end to get the tail light panel, trunk extensions, and trunk extension caps out. I'm keeping the trunk floor loose until everything goes back together; it is easier to work underneath without it.
Continuing with the fabrication and welding tasks, here is pic of the Street Lynx bar welded in place. I had to fabricate some shims to close gap between the bracket and frame rails as the cars frame rails were over 1/8" wider than the Street Lynx.