72 duster Build progress
A bit of updating to do!.
A couple days ago I made al ist of some of the "final" parts needed to get the duster running and moving under its own power and I went to the parts store and had the guys behind the counter running into the back room for a good hour finding me the parts I needed lol.
I took some romax wiring and cut it to length and used it to bend into the shapes i wanted my radiator hoses to be and took them into the parts store and said " I needed hoses shaped like this, what can you do for me lol" sure enough we found upper and lower radiator hoses that will do the job just nicely!.
I also picked up my heater core hoses, my fuel line,my vacume lines, about 14ft of steel transmission line so I can run all new the route I want to run it , also got a new 10x16 I believe tranny cooler so it should stay plenty cool,picked up new transmission seals,transmission pan gasket and filter,trans fluid,trans mount,mopar oil filter,oil,coolant,radiator cap,accel performance ignition coil and a few other goodies.
I still have a few odds and ends left to get....some bell housing bolts,u-joints,a couple u-joint straps,mufflers,fuel filter,header bolts,tranny dipstick and a couple other little things.
Most of it I can probably get for under $100.00 and then I will see what I can do about finding a used trans dipstick and whatever else I can get ahold of for cheap or free.
I got a few pictures I took a couple days ago I will post to show a little progress but i need to take more pictures of what has been done in the last day or so....so stay tuned!
new cap
new coil
new TCI stall converter
Freshly sealed,gasketed,filtered,mounted,painted 904 (was gone through by trans shop in 02 so I just freshened it up is all)
A bit of updating to do!.
A couple days ago I made al ist of some of the "final" parts needed to get the duster running and moving under its own power and I went to the parts store and had the guys behind the counter running into the back room for a good hour finding me the parts I needed lol.
I took some romax wiring and cut it to length and used it to bend into the shapes i wanted my radiator hoses to be and took them into the parts store and said " I needed hoses shaped like this, what can you do for me lol" sure enough we found upper and lower radiator hoses that will do the job just nicely!.
I also picked up my heater core hoses, my fuel line,my vacume lines, about 14ft of steel transmission line so I can run all new the route I want to run it , also got a new 10x16 I believe tranny cooler so it should stay plenty cool,picked up new transmission seals,transmission pan gasket and filter,trans fluid,trans mount,mopar oil filter,oil,coolant,radiator cap,accel performance ignition coil and a few other goodies.
I still have a few odds and ends left to get....some bell housing bolts,u-joints,a couple u-joint straps,mufflers,fuel filter,header bolts,tranny dipstick and a couple other little things.
Most of it I can probably get for under $100.00 and then I will see what I can do about finding a used trans dipstick and whatever else I can get ahold of for cheap or free.
I got a few pictures I took a couple days ago I will post to show a little progress but i need to take more pictures of what has been done in the last day or so....so stay tuned!
new cap
new coil
new TCI stall converter
Freshly sealed,gasketed,filtered,mounted,painted 904 (was gone through by trans shop in 02 so I just freshened it up is all)