67 Dart Build Triangulated 4 link & Mini Tub

abodyjoe said

yea thats what he says.. into the 10's is th elimit i believe. it was really designed more to handle then the drag strip. but it worked well on the track for me. dropped my 60' time from 1.69 to a 1.63 with no other changes. may have been able to get more out of it but i didn't really feel like fine tuning for the track because my car is more a street car.

Click to expand...

Hey Joe,

Is there a reason why they say it is only good til the 10's? Not that I will be going any quicker than that.

I was hoping that the Bigger Tubes and Rod Ends would help if I stepped up the power to 7-800hp+ or so someday. One thing I did do is use a 1/4" wall thickness on the Shock Tower. My feeling is with MAX power applied that would be the weakest link in the system. I feel that it will try and RIP the upper link bar tabs right off the Shock tower. That is why I will be doing gusset's on those connections wrapping them around the Shock Tower fully welding up and around the tower, also on each end of the shock tower along the bracket that I made to tie to the frame rails to strengthen it up even more. I will also add them on all the bracket tabs that hold the link to the axle. This way if the car ever pitches sideways the gusset's will add more strength in those areas.