Door Hinge Hardware Question

The door should have threaded plates top and bottom for all the bolts. It could have fallen out or maybe was removed when you stripped the door? The hinges have a square hole toward the front on the body side of the hinge. It takes a bolt with a big washer. The pillars have two bolts going through the hinge into the pillar and four bolts that go from the inside of the car into the hinge. The lower hinge pillar has two square holes but there is nothing in the inside as the bolts come through those holes from the inside and then into the door. Mount the hinges onto the door in as central a spot as you can. Then mount the door w/hinges onto the car but only tighten the two forward bolts untill you get everything lined up (top,bottom, right, left, in, out). Then tighten the rest and install the fenders.