72 Demon now underway
This is what they supply with directions to use screws or pop rivets to cover the hole cut to the template they supply. If I wanted it to look like Jethro Bodine did the job that is exactly what I'd do.
You probably are referring to Bill Reilly's BigBlockDart.com story on putting a Viper T56 in an A-body..
The TKO600 is a 5 speed with 600 ft/lb torque rating. More importantly than upgraded torque handling over less expensive TKO500 brother is it has closer ratios particularly in 1-2 where TKO500 has 3.something first gear for high rear gear (later model economy) applications. Musclecars with lower rear gears (this will be 3.55) don't need the launch help or a granny first, so the TKO600 is going to be great combination with 408 and a 9.5CR + strong hydraulic cam.
It wasn't that important to have an 833 in this build, and the overdrive goes well with a bunch of the other mods to make this a smooth driver as well as a tire shredder!
This is what they supply with directions to use screws or pop rivets to cover the hole cut to the template they supply. If I wanted it to look like Jethro Bodine did the job that is exactly what I'd do.
You probably are referring to Bill Reilly's BigBlockDart.com story on putting a Viper T56 in an A-body..
The TKO600 is a 5 speed with 600 ft/lb torque rating. More importantly than upgraded torque handling over less expensive TKO500 brother is it has closer ratios particularly in 1-2 where TKO500 has 3.something first gear for high rear gear (later model economy) applications. Musclecars with lower rear gears (this will be 3.55) don't need the launch help or a granny first, so the TKO600 is going to be great combination with 408 and a 9.5CR + strong hydraulic cam.
It wasn't that important to have an 833 in this build, and the overdrive goes well with a bunch of the other mods to make this a smooth driver as well as a tire shredder!