Best 273 and 318 builds (NO 360's please)

I know this has been an idle subject for a minute but here is my 318 as it was and how it will be in the near future:

Was: 318 stock bottom end, balanced with .040 over flat top pistons w/ valve reliefs 1.72 compression height (pistons down .094 in the hole)
Comp Cams 280H cam 230 dur @ .050 480 lift w/1.5 rockers and .512 w/ 1.6 rockers
Magnum heads gasket matched, bowl blended and valve job.
Chinese Air Gap version intake manifold w/ 650 DP Holley carb

Will Be:318 stock bottom end, balanced with .040 over KB 167 pistons w/1.81 compression height (pistons zero decked)
Comp Cams 280H cam 230 dur @ .050 480 lift w/1.5 rockers and .512 w/ 1.6 rockers
Magnum heads gasket matched, bowl blended and valve job.
Chinese Air Gap version intake manifold w/ 650 DP Holley carb

Drivetrain is A904 built be me 10 years ago with shift Kit and 2800 stall Also has a 8.75 SG rear with 4.11 gears.

Ran a best time of 13.91 with the previous motor that had 8.8:1 compression will now be running around 9.7:1

I will be running it in Hockenheim this year in August on a prepared track and I am very anxious to see how it will run.