7AL by MSD

Yes those coils work fine too, just stay away from the drag racing coils like the pro power. I might add that on the cap and rotor make sure it has brass post, I use Accel on a Mopar dist. which has the lean burn pick up coil-those have no vacuum advance and are one piece. I feel vacuum advance is not worth it to set up, some have good luck with them but I just set the total timming at around 36-38 degress and forget about it. You want to run the lightest mech. advance springs to give the quickest advance with no ping. The lower the compression and the higher the rear end gears are-like 3.91-4.10 the quicker the advance can be without getting spark knock.