67 Dart Build Triangulated 4 link & Mini Tub

Just so you 67 and up Dart guys know that if you are going to keep all the welding inside the car it is VERY tight on top of the fender wells right below the package tray area. I had to cut the package tray on the FACE where the bracket goes from the fender up and peel it back some to finish off the welding. This will need to be done on both sides. I actually sat in the trunk and looked thru the window and the speaker cut out to finish welding it off. It is a PITA to do for sure!

I also took a BFH and Pounded the dimples in the inner fender well toward the inside of the car for more tire clearance. You can see the difference from the Passenger side to the Drivers side in the photos above. I have done it to BOTH sides, I showed 1 done and 1 stock so you all could see what I did.