What cam should I get?

rumblefish360 said

Now depending on how the rest of your car is set up and your overall plan is, it could be just right. The rest of the info you never provided. Lets get some facts here.
Cars weight
Gear ratio (You'll end up with)
Tire size (You'll end up with)
'.

Click to expand...

Tire Size: 235/70R15 (what I have now)
Section Width: 9.25 in 235 mm
Overall Diameter: 27.95 in
Sidewall Height: 6.47 in
Radius: 13.97 in
Circumference: 87.80 in 2230.1 mm
Revs per Mile: 744.1

Tire Size: 275/60R15 (what I will go with after new wheels not much difference in diameter)
Section Width: 10.82 in 275 mm
Overall Diameter: 27.99 in 710.94 mm
Sidewall Height: 6.49 in 164.84 mm
Radius: 13.99 in 355.34 mm
Circumference: 87.93 in 2233.4 mm
Revs per Mile: 743.1

Cars weight: 3500 gvw

Gear raito: I don't know... but it isn't in the 4.10 range or 4.56 I also do not have a tach yet. Feels like 3.21,3.55

Transmission: manual 4-speed

Intended use: Street racing and car shows

273 new rebulid bored .60 over
10:1 compression
Crane cam (specs ????)
Headman headers
Flowmaster 40s
Performer intake
500 cfm Edlebrock carb
Better than stock valve springs
Accel 300+ ignition (multi strike,rev limiter)