***MADDART's 70 Dart Video***

ramcharger said

You need to someone hold a camera for ya. :) I tried that even in my truck and it was too damn dangerous.

BTW, nice sliding gate. If I buy the house I'm living in I'll need the same but wrought iron topped with concertina wire to keep the riff raff out.

Whats the duration on that hughes cam at .050"? Solid or roller lifter?

Click to expand...

Yeah kinda dangerous for sure but where I live cars and people are not around much. I need to tape that area off I am pretty sure it is about a 1/4 mile or so.

Cam Card, I used Hughes 1.6 Roller Rockers, banana shafts and hold down kit. I also used Hardened Manton 3/8's Push Rods with 5/16 Ball/Cup oil thru tips to keep Pressurized oil on the ball and cup area. That was recommended by Brian at IMM Engines. I do believe that is why it HOLDS the valve adjustment so well. JMO

I also used the COOL FACE lifters that have the EMD hole on the bottom so Pressurized oil is always on the cam/lifter contact area.

Solid Flat Tappet Camshaft Hughes HTL5660AS





Push Rods





Assembled