legendary auto interiors ltd. problems?

I bought interior front door and rear quarter trim panels from Legendary. Nice reproductions with one exception. OEM panels had a slot cut in them for the trim panel clips to slip in behind. Their panels have an outline of a slot that you have to trim out your self. Thats bad enough, but whats worse is they want you split the fibre board where the slot is to be cut out and push the alligator clip into the board about half of the thickness of the baord. Yeah you can do that with a very fine flat screwdriver and get the clip to slide into the pocket but as I found out, if you need to pull the panel back off even using the proper tool to get behind the clip, you'll pull the clip through the board making it impossible to use the slot over. If you try to slip the clip all the way behind the board then you have the outline of the clip pushing against the vinyl and is clearly visable from the front of the panel. The board they use isn't as thick and strong as the original stuff was. The vinyl match is a decent copy though.