Heads Up!!!...Edel.D4B on E-Bay

65Val said

yes,but the D4B has the small ports for the 273,318 engines. The bolt holes can be modified to fit the early heads if needed,no sweat.That IS the only difference between early and late heads.The LD4B has too large of ports for the smaller engines. The "L" stands for large port D4B.

Lee...I saw that one too.

Click to expand...

Are you sure your not confusing the LD4B with the LD340? The LD340 has the larger ports for 340 and 360 heads.

I hope these links work. Unfortunately, from the top, they do look very similar except for the carb mounting pad.

[image]http://www.hotrodauctions.net/ebay/TRM/10-10-06/045.jpg[/image]

[image]http://board.moparts.org/ubbthreads/upload2/2997363-ld4b.jpeg[/image]

Guess not. :(


This link shows the LD4B fitting '67 & up small blocks. But no D4B listed.

http://victorylibrary.com/mopar/edel.htm

If the bolt holes are a different angle, they could be re-done. But is it worth the time?




.....and here is another thread from this forum about the intakes:

http://www.forabodiesonly.com/mopar/showthread.php?p=95394#post95394