What clutch fork with Lakewood scatter shield?
I really like these clips also which is what I was looking for at the auto parts joint, but they did not have them.
Ultimately I would like to try these as well and see how they do.
I messed with plenty of these with Mercedes shift linkage rods and they are really, really bad *** clips that never come off.
You can get them off with pliers but a special tool makes it real easy.
Once they slide onto the round face of the stud through a square hole, the outter shell of the clip clamps down around the hole and snaps into place.
You just push them on and hear them snap into place and never have to worry about them coming off.
In many cases, rubber bushings will wear out and these clips are still holding fast even with tons of slop in the shift linkage from a deteriorated bushing.
I really like these clips also which is what I was looking for at the auto parts joint, but they did not have them.
Ultimately I would like to try these as well and see how they do.
I messed with plenty of these with Mercedes shift linkage rods and they are really, really bad *** clips that never come off.
You can get them off with pliers but a special tool makes it real easy.
Once they slide onto the round face of the stud through a square hole, the outter shell of the clip clamps down around the hole and snaps into place.
You just push them on and hear them snap into place and never have to worry about them coming off.
In many cases, rubber bushings will wear out and these clips are still holding fast even with tons of slop in the shift linkage from a deteriorated bushing.