Bad ECU from the factory!!?

Worked on today. Changed out bad wires checked, and added ground wires. Fixed possible short near ampmeter gauge.Checked reluctor with brass feeler for the 10th time. Checked coil; coil is good. Used 2nd coil, and measured primary, and secondary resistance on both. Both measured the same, (within values on drawing) no spark with either coil. I also ran direct 12 V. from battery to + side of coil. I tried with, and without resistor bypass. So it has got to be either the distributor, pick-up, or the ECU, I am taking my 3 ECUs to Advance Auto Parts tomorrow, 2 of them were Summit replacements that never worked when installed despite a good ground. The 3rd is a Mopar ECU that was being used at the time the engine did run. If the Summit replacements are bad; that means that they sent me 2 bad ECUs back to back. Despite that.... I hope that they are bad. It might end this mystery once, and for all!