340-6pac Dyno

Not able to see the picture, sorry. Boy all three of ours is pretty close. Here is mine:

340 bored .040 over
Fully ported E-brocks and intake by Ryan J(ShadyDell)
The heavy 10.5 TRW forged pistons with .040 off the tops for the closed chambered heads. 9.8 to 1 compresion
273 Forged steel crank out of a 64 273 with mallor weight added
Scat H-beams rods
Comp cam XE285HL 242/[email protected] with .545 lift on both
Degreed in at 104-4 degrees advanced
Moroso 8 qrt pan also
Total MSD ignition-other that there black and say Mopar on them except for the MSD Pro billit disturbutor
My header are probably to big they are the 1 7/8 with a 3 1/2 in collector
I'm also using a flow cooler water pump

I'm sure your guy's will make more power. That's killer.

I'm running a four speed and 4:10's with street tires for now that are 13.3 section wide by 28 tall.



Lee