74DartSwinger360

Profile posts Latest activity Postings Garage items Post Areas About

  • To lift the car we used an engine/cherry picker with chains attached to the inner frame rail where the front bumper bolts to the frame. Then we rolled the k-frame with the engine/tranny/headers/lines already in place under the car and slowly let the car down over the assembly.
    68sedan here, I tryed to add you as a friend, not sure what I did wrong but you never came up on my list.I'm new at all that sorry.
    Wheel size , the rallye wheel front are 14X6, and the backs are 15X7 with a 4 1/4 rear spacing. The weld wheels are 15X3 1/2 fronts and 15X7 in the rear with a 3.5 back spacing. The ralley wheels has a 1/4 spacer.
    Thanks Jim
    The glove box cover mounts to the face of the existing glove box, and the turning knob bezel is sunk in like the original. I provide screws and the mounting holes are pre-drilled.
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Back
Top