The best thing for the track is having the big events such as the recent scag mowers superstar shootout to bring in money to the county . Maybe a second NHRA event could be located in florida now that BMP has shown its a fast track and can draw a crowd.
If you are running a roller cam you need to use #302 , #308 , #576 , magnum or trickflow heads . Any other head will require the pushrod tunnels to be enlarged.
I just installed 2 sets . 1st - 1988 la roller block cut .010" pistons down .004" , 2nd 1977 - 360 block light clean up cut .002"-.003" pistons down .014" . Both sets were within 5 grams from stock , and compression with stockish 360 heads and felpro 1008 came in at 9.6 - 9.7 to 1
I just had a set of 308's redone locally. Used the trick flow #16514-16 single . Bigger than you need , 118lbs seat . Check out the trick flow single spring chart on their website , many to choose from .
All the acessories were hard to find. The center caps were NOS from ebay , no part numbers . I believe there are 2 sizes , 2-1/8 and 2-5/8 . They attach with a screw in the center thru a special cone shaped retainer that fits the inside of the wheel . These retainers appear to be made for the...
speedmaster pce273.1050 5.011 x 1.60 x 11/32 , used them and their 2.02 intake several time to convert small valve j and other 360 heads to big valve . no issues , my machinist likes them
Are you looking for someone to just rebuild the engine or to do the entire job of pull engine , rebuild , reinstall , break in cam , make all necessary adjustments etc ?