Search results for query: *

This whole timing cover fits a 360 along with 273/318/340 is all new to me. Maybe they assume you just put a thick bead of RTV in there and throw the end gaskets away? Or maybe we should feel lucky a new part is available in the first place?

this is a hold over from the old CARB laws that began in the 90's when the first round of "smog check" included vehicles from 1968 (i got failed in 1996 for not having a breather that connected to the aircleaner). if you look thru the catalog (or edelbrock's) you'll see "50 state legal"...

I back it up onto a hill next to the driveway to gain clearance... clean the underside with pressure washer and a plastic putty knife.

I imagine you 273 powerband is fairly flat, so even with less rpm per mph you'll have similar hp available to you at the same general road speeds.

I just use the hose with the nozzle set on jet, mower running full throttle, squirt water where the engine meets the deck-cooling slots(?) and then aim it underneath front to back. usually get squirted once in awhile. need to clean it because when it sits in the garage and I go in there to putz...

They are shitty. Tons of them around here with the tarps destroyed and the metal frame standing. If they don't cave in, the sun destroys them.

Installing the console back into my 66 Barracuda, I broke the automatic shifter pawl. This is the wire inside the shifter that is depressed to change gears. See pictures Is that a replaceable part? How hard is it to replace? Looking around, I have not found that part for sale. Help and...

They also run Bartertown!

Welcome to FABO, Ben. That's a good looking car! How about more pics!

So lizard people run West World??? :lol:

I had the one from harbor freight for 5 or 6 years before 60mph winds took it out. Never let snow sit on it in the winter time so that might've helped things. https://www.harborfreight.com/10-ft-x-17-ft-portable-car-canopy-62860.html

Hello Everyone, Wanted to put a quick plug in and introduce myself. My name is Ben and I'm new to the forum. I have a 1966 Plymouth V100 170 that I love driving. I bought it in high school and I've owned it for 14 years. Looking forward to being a part of this page. Thanks, -Ben

when what they should be caring about is that lizard people have duplicated our leaders and are taking over!!! (just wanna get into the conspiracy mindset)

I like it!

Bee traps showed up.. think i can just hang them off the heads of the gutter screws.. will do it this weekend

...it's been discussed here on this board and disproved. to think that CARB is running some type of surveillance state on classics is edging toward tinfoil territory. we make up *maybe* 1% of the cars on the road in california. they care wayyyy more about big trucks and diesel than anything else.

Very little snow here at 115° in the summer (I've seen 123° on the back porch, in the shade). Heating the garage is not a problem. The sun seems to kill them first. And I've still got a fallen tree here to take care of too (16" trunk). Thankfully it didn't fall on the house, or our boundary fence.

383... no A/C but a bit more pleasing on the eye

yes they are.Shafts turns with a little resistance,Screws are free

Hello Everyone! Just recently joined this Forum. I have a 1966 Plymouth Valiant V100 with the 170 and a 3 on the tree. I've owned it for 14 years now and I've recently been running into issues shifting between gears. The linkage in the column continues to get stuck, mainly trying to get back...

I have an assortment of pie tins for sale the 44 0 I want $250 it's used 3831 70 Orange is New Old stock I want 375 for it and a 440 Magnum is like new but they've been on the shelf for a long time I want $400 for it or make an offer as far as I know they don't make these anymore

Never thought to look at Costco, thanks! (LOL!) I was going to ask if the Costco "tents" were capable of dealing with snow ("snow rated"?), but then I looked at your location... :lol:

73-76 big ball spindles knuckels Rebuilt uca with moog BBJ and bush Comes with cams Comes with rotors Comes with calipers (not shown) But calipers need rebuild or use as cores missing one dust cap $300 bones plus shipping from 02048 Thanks

The mustang rear could probably be used, as is. The explorer rear uses a long axle and a short one, and needs to be narrowed (probably cheaper than a mustang). You don't mess with flanges, you take a section out of thelong axle side, and use another short axle. You would probably have to...

I'm clearing some trees and brush in the woods behind the shed/shop especially for this (no pics of this yet), and I've been out there when it's "pretty damn windy", and due to the surrounding trees and such, I'm pretty confident the wind won't be an issue. Now of course if one of those old...

Here's a set of 275/60 on 12" wheels, going on my sbc powered RX-7... 13.5" section width. Grant

With a posi no less! LOL

I have an assortment of mopar license plates$25 each plus the ride

I know someone was asking above where I'm at and the sea level? Im Okaloosa County FL

1971 style....super rare