Separate names with a comma.
Use a 3/32 allen wrench and turn the screw in the vac can clockwise until your idle timing comes up to about 30*. That should help. The best...
CFM Required 757.0601851851852 100% VE CFM Required 696.4953703703703 User 90% VEYou may have a great set of heads but to utilize their full...
There are a few basic rules when designing a fuel system with an electric pump, I'll give you the basics but if you really want to do it right all...
Don't waste your time they don't work, just a Chinese copy of the same carb you have.How did the main body get cracked?Claws are at least...
Save your money, the Eddy is cracked internally and leaking all the fuel out of it when it sits for a while.They're all cracked and should all...
K3522:If your getting detonation then we need to go over your specs again. That distributor is designed to run with the vacuum line connected...
Proform - Bad Chinese copy of a Holley HP Eddy- Mid range lean out, no flow, no power, antiquated designIf I used a Windshield Washer motor,...
Call Proform techline...Oh, they don't have one?...geee whiz.... Call Holley.....they won't talk to you because it's not their parts?Geeze so...
Make your decision carefully based on facts not opinionsHolley Blue will flow at 72 GPH at 7# pressure Holley blue regulator will only flow...
GotDart...see you in October in Baytown for the Big Mopar show, I'll be hanging with Todd Marsh from Marsh Performance at his booth.We'll have...
BG makes the correct spacer for application, Part Number 5282010GC, it's 5.25" tall and goes between the manifold and the air cleaner $499.00
Wow same as an Edel-broke LOL
I don't undestand why you just don't Tune the Race Demon?It's really a little too big for your application you should probably have used a 825...
Holley Carb $500 Proform Main Body $180.00 Proform Metering blocks $50.00 each Proform Base plate $150.00What you end up with...a Chinese...
$50-$60 is still too much for an Edeljunk, leaking POS. We dump them in the big blue barrel.Edeljunk $289.00 used 1 day Maybe $50 575 Road...
4 hole spacers move the tork band down in the RPM Range by increasing the venturi length and keeping the A/F mixture directional and holding the...
Your float may be set a tad high and you may be getting a bit of siphoning on shut down when the temp spikes.Are you running one or more of...
Interesting comment, we have sold 1.4 Demon carburetors per working day this year. We disassemble each carburetor and inspect it for any of the...
