Separate names with a comma.
from the port size it looks like it will be for a B1 MO head. Sad part is the width of the port will not allow it to be used on anything else.
how much power? I would not buy cheap axles. I would also not buy 5.50 because most people run 5.0 and selling them may be hard.
if it is a drag car with small front tires put the proportioning valve on the front brake line
i have had great luck with their quality. I will be getting that same piece soon because they are the only ones that make it. I like how the...
take a wire wheel and clean the area to really see what you have and re post pics. With the rust on it its hard to tell and you still dont have a...
just weld the up. and add a patch plate if needed.
no you dont want to cut into the front frame rails. they are two piece ( a bent channel and a pop riveted top) there is no boxing needed. You run...
[ATTACH] [ATTACH] [ATTACH] This is all you need
just run front bars. they run from the front of the cage (by the dash bar) to the top of the frame. have them tie into what ever you plan to run...
if it was mine and i was going to do a frame drag only car i would remove the floor and everything circled in red. Use a strut or a-arm front end...
Russ is a douche bag. Sucks that he own INDY products and has such a big chunk of the market
I would not reuse the stock rails. Buy an premade frame. Don't buy the cheap coil overs that are a shock with springs slid over them. spend the...
I dont think you need a spring for fiberglass doors. They are so light and fragile i wouldnt want springs on them. I have mine on stock hinges...
are they the CNC versions?
oh ok that makes more sense
no the firewall is gone. really there is nothing left on the car The motor is mocked up about 12" back from stock and lowered. My crank height is...
.The rule is great if the cars all well matched and the tree is super close but anything over a half a second and you can see the red light and...
Thank you for you guy's input. I have been dissecting the "book" and I think I got it now. Biggest issue I see is my ladder bar cross member is...
sorry i said sill i meant the stock rocker on the door. [ATTACH]
Ok i finally broke down and ordered my SFI 25.5C booklet for my new cage and man people were not kidding about the book being confusing and not...
I think with my lack of sb knowledge and having having almost all the parts for the big block i will stay on my bb path. I was just curious....
How much does a r3 block weigh? How much does an iron gen 3 block weigh? My 400 weighs 200 minus caps
Great information! I didn't know small blocks were dried up. That's a sad thing. I guess staying with a bb is my best option. Thanks for all the...
could call but if amazon has them i think there are gettable Amazon.com: Mopar P4876381AB Race Block: Automotive
i heard gen 3 heads are ok but lift issues and the blocks are weak. I know very little about sb so thats why i was asking. why is a r3 hard to...
thanks rumble thats what i wanted to know. I was wondering because a stock 400 block will only take so much hp. Would something like a r3 take...
Building a stupid street car. I currently have the car mocked up for a 400 bb with middle of the road heads, medium sized procharger, and lenco...
you need to know the weight of the rear of the car then call the shock maker. This will be impossible without four corner scales. There is another...
my tip is based off the photos, buy a chassic and use the shell. you will save a ton of cash.
There were no "Cudas" pre 1970 please show some respect and address my 1968 /with its with its full name.A cuda is an E body. as in... Easy to...
