Separate names with a comma.
Anyone wishing to sell their purse of goodies? I am fond of sparkling swithches and of the blowhard vents. What's in the box would give someone...
Dave, I don't want to say something and then have to go out to the water tower to just off the sucker just to save a little grace. I'll chase...
Yep, that be it. how does the blower mount. No details necessary, just where and with what. Thanks much. Now I know what to look for. Take...
Dave, you always come thru. My Barracuda is a Notchback. I see where the long thin vent mounts on a Charger, and I suspect it will mount the...
Thank you A56. Now I know what to look for. Any idea where to find one for a Notchback? Thank you again for your reply
I have never seen a set of rear window defroster vents, nor the blower, offered. I don't know they even made vents and blower for a '67...
I am looking for a very good set of Black safety belts to finish off my interior.
Sure could use some help trying to find Pass and Driver side air boxes for a '67 Barracuda. Must be totally functionable, not too worried about...
I’ll take the them. PayPal?
Scott, I don’t know what I would do with 2 sets plus the one I have. I would like to make an offer for just the set to the left in the picture,...
What engine are you going to put in it? I have quite a few parts for a BB engine I.e. voltage reg, alternator, starter relay, FAST efi with...
Thank you, I am in touch with him..
I need the rear window trim for a ‘68 Barracuda coupe (notchback) in order to finish my exterior restoration. I know new ones do not exist at any...
I. Still have it, but have a set of dual quad FiTech EFIs on it. having to do some elec work on the Duster before I give up on the EFIs. Not...
Where are you at? I can use a discounted pricing I have with Fedex and have them shipped for less if you can get them to a Fedex pickup point. I...
Still have the bucket seats and the chrome (if not pitted ) wipers I think I have noticed? Any parts of a console?
Very Nice Job!
Good point. The compression is 9.4:1 and does have Edelbrock Performer AL heads with headers. Your comments make me feel more comfortable moving...
did you receive the PM sent on the 19th? If not, can you reply to jamsmith46 at hotmail.com?
I sent you a private message but have not heard back. Did you receive it?
Hey, thanks for the inputs from all of you. Quite helpful and mostly appreciated. The judgement call that “sounds like he is a young gun looking...
Agreed, is it just a waste of fuel, or a matter of not using a WOT, or would it bogg to engine down. I wouldn't be asking if the engine had not...
Newly Rebuilt with Holley Pro Carb Kit. Mounted on an Offenhauser Dual Quad 360 mdl 5186 that was made for Plymouths and Dodges with a BB 383...
How many CFM is too much for a ......383 +.030 over, Edelbrock Performer heads, MSD ignition, headers, auto 727 with 2400 converter and 3.91...
Garry and Bob, thanks for the reply. That is just the information I was looking for. I don’t think I will go to the upper limits right now, but...
Your recommendation is by the book and I have mine set at 13.6 at idle and 14.3 at cruise, but I believe it is running rich at those settings.
I am running a .030 over 383 with MSD, 484 cam, Performer Al heads, headers, 3.91 rearmed, 727 trans. My problem is with he EFI, I think. This...
I am needing to find matching 2x4 carbs that will fit on an offenhauser 360 manifold for a BB 383. I know, I know a new single 4 barrel can do the...
