Separate names with a comma.
interesting post, and very nice to hear. My new motor is a 416( 418 actually) a local guy had spent a little time “ improving” my stock eddie...
call torqstorm. Just up the road from me. Fine people. They will tell you exactly what you need, and i believe will source a carb for you as well
[ATTACH]lol No, own a car dealership, on the “ showroom” floor every winterhere is one from Martin this past summer, 4th round on a bracket...
there are a bunch of Mopar guys at 131. There are a bunch of us small block guys who hang out together.me in my A4 silver 69GTS Buddy with Red...
I live down in Portage. I race at 131 a lot
I have a 69 Dart. All steel, flat hood, i weigh 330. Its 3310 at the line. 8 point mild steel bar, frame connectors. I have a 360 with very...
no rumor, they are
Sounds like a nice motor, but it will have trouble i bet running mid 11’s unless the car is light. Gonna need the convertor to be spot on, you...
Had that intake on a flat hood 71 duster, cleared easily with a Mopar performance air cleaner installed..like this one... NOS Mopar Performance...
Ran a good bit smaller cam than the 248/248 dyno cam. 11.60’s at 115+ 3400 pounds, all steel, flat hood, with my 320 behind the wheel
That motor was in my 71 Duster
Guy i know is running those EQ heads on a stock stroke 360 They are just checked and cleaned up, not ported. Motor is high compression(13+) 3550...
Nice work
Doesnt surprise me at all.
any details on that build?
Agree 100% Just stating what i have seen. There might well be those who expected the TF head to run off and hide from a ported eddie. Based on...
I will throw my 2 cents in, for what its worth( likely not much..lol) I am familiar with a typical bracket type build Trick flow stroker combo....
the tool rooms are excellent springs. Its smart running a roller and RPM to not scrimp on valvetrain components. I backed my rockers off every...
i used those exact roller springs on my W5 heads. 245/600 pressures, 273/280 comp roller that Dwayne specced. 699/672 lift with 1.6 Jesel...
Get a good convertor behind them they will leave just fine. My Buddy went 1.27 ish 60 foot with his at 3000 pounds If it was 3200 pounds it would...
Agreed. Kinda like people who pay thousands and thousands extra for a diesel motor home, over a gasser, then 8 years old its got 30,000 miles on...
i would enjoy that car for other uses and get a commuter car
Yea, my buddy with the green Dart sport you met at BG had a 68 Dart with one of them in it. Ran 9.40’s at 142-143 with a 904. It isnt a bolt in...
Gonna take a good bit to get a stock stroke 340 in the 10’s NA I can tell you what would get it done, because i just lived this with a 360....
Know of several R5 P7engines, fresh ready to run for under 10k complete ready to run that have sold. Buddy of mine bought one and ran it in a...
If it was me i would buy some dye, put it in the engine, run it, then use a UV light. Makes it 50 times easier to spot the leak. You may not have...
try AED
my stuff is at Valley machine right now. Good guy for sure.
extremely impressive. It should run 9’s easily unless the car is extra heavy We figured my old W5 motor( when i had it) made an honest 640 It went...
I dont think you are WAY off at all. I have a 69 Dart. 3300 with me in it( i am 320) Bone stock 360 shortblock with replacement pistons 30 in the...
