Separate names with a comma.
What does it take to bring your gasser to the show? what type of help do you need?
Car Shows - Pavilions
Well it was funny while it lasted
I am begining to feel like this is an off-shoot of Facebook, my posts are being censored or deleted
I expect delivery on 8-11 or 8-12I am in the Tatum Blvd and Bell Road area of phoenix
Hello all, I just purchased a headlamp aimer setup. Hopefully it should be serviceable. If anyone needs or wants to use it, you are welcome...
Measure the voltage at the battery, then turn on the headlights. If the voltage drops below 11vdc there abouts, you have a bad cell, maybe...
you may want to look into replacing it with a rotary compressor. I think I got mine from Classic Air. They are much more efficient than the...
Dan is always right, agreed. But who in the world will pull your lights apart to tell you that some part of it is ILLEGAL. Just is not going...
I have LED strips similar to...
I bought 1200 feet of wire in multiple colors and rewired my car, myself. If you get a good schematic, and blow it up, with a finger and...
I already have about 1200 feet of assorted wires that I used to rewire the car. I am not sure if I will use the 14 or 12 gauge. I am leaning...
I spent a hour or so this morning trying to locate this type of kit and couldnot find them. Thank you, I ordered 6 of the kits
Every H4- headlamp Ceramic-Socket I have found has 18 gauge wire in them. This is really a kick in the teeth when I added the headlamp relays...
Maybe so, but you need someone that is much better at welding than I am
I could probably tack in the floor pans. Going on my limited knowledge, I would guess that a stick welder would be your best choice for the...
Do you want to use my mig welder. I will bring it over. but if it is a larger job, I do not think this will do the job. I am not a good...
Dorthy and william
I have switched over to these flashers. They have an adjustable flash duration. But they do quit every other year or so. So I keep spares here...
I am not very good, but I am willing to try. Or do you just want to use my mig welder? PM meNext day: Was this a joke that I did not get???...
When I drop the steering column when taking out the dash. The linkage would pull out the park rod and the car started rolling backwards. Seems...
When I was a kid, about 50 years ago, I had installed a Tach. ( I should have said Stupid Kid). That would happen to me and I found that the...
I would bet if you asked any classic car owner. car shows are more essential than churches, synagogues, liquor stores and abortion clinics
I would go to 67th and Bell but, I have the front of the car taken apart. I am trying to get the remainder of the body work finished.I...
According to my schematics it is a 6 gauge wire, apparently it is Brown. Do you have a set of schematics for the car? That will answer a lot...
Check and see that the wires are connected to the ballast resistor before the coil input
Or ground the coil to shut it down
I doubt this. As a child, I contracted e-coli and ran a fever of 108°, for over a week. Yes, it is a miracle I am still alive
STEIN
I think I had the same 21 gallon gallon you had. I finally got sick of it. The noise was terrible, I could not run it except during the day...