Search results for query: *

  1. khuebner250

    When does money outweigh sentimental value? 1968 notchback build thread

    I think without the caps seems to fit the cars mood better. And I haven't tried to figure out trim rings yet. I like beauty ring and caps and haven't ventured down that road yet.
  2. khuebner250

    When does money outweigh sentimental value? 1968 notchback build thread

    I picked up my next project(s) that I'm super psyched about. I bought a 1966 Dodge W200 Power Wagon Crew cab roller! I've been looking for a 66 crew for about 16yrs. It's only the 3rd one I've ever seen for sale. Title is correct and matches VIN, Data Plate and Frame stamping. Original 13,000...
  3. khuebner250

    When does money outweigh sentimental value? 1968 notchback build thread

    Cars 99.9% done. Rear main weeps a bit and the speedo cable is jumpy every once in awhile (due to a VSS jumper for the TCM). I'll take care of those next year. Car is currently in hibernation.
  4. khuebner250

    When does money outweigh sentimental value? 1968 notchback build thread

    Got the intake painted. Just waiting on a couple AN fittings and a phenolic open spacer. I caught a thread on 1 of the rear AN fittings and destroyed it.
  5. khuebner250

    When does money outweigh sentimental value? 1968 notchback build thread

    Took measurements and started drilling.
  6. khuebner250

    When does money outweigh sentimental value? 1968 notchback build thread

    Go the intake pulled this last weekend.
  7. khuebner250

    When does money outweigh sentimental value? 1968 notchback build thread

    I need to tidy up the Cuda asap. I'm currently on the lookout for my next project. I've even got the "War and Finance" department on board! Looking for a 65.5 or 66 Dodge sweptline W200 crew cab Power Wagon. So if anyone knows of one, please for the love of God, PM ME!!!
  8. khuebner250

    When does money outweigh sentimental value? 1968 notchback build thread

    4th is keep driving it and playing with the EFI.
  9. khuebner250

    When does money outweigh sentimental value? 1968 notchback build thread

    3. Install new rear shock plates to increase shock travel. I only have an inch of compression in the rear. So I grabbed a pair of AR engineering plates. Should drop the shocks 1.25-1.5" so I can stop bottoming out the shocks.
  10. khuebner250

    When does money outweigh sentimental value? 1968 notchback build thread

    So think I have 4 items left to correct: 1. VSS jumper cable for speedo. See broken one above. 2. Trick flow intake. I haven't done the swap yet. I will this weekend. I have to pull the old M1 and measure height. They are close but I need to make sure. Trick flow is 5.125 and M1 is 5.??? Then I...
  11. khuebner250

    When does money outweigh sentimental value? 1968 notchback build thread

    Just the timing of it. Oct and Nov of last year we had wicked fires here in Colorado. On my last drive there was ash falling everywhere. And I broke my jumper cable for the VSS for the OD.
  12. khuebner250

    When does money outweigh sentimental value? 1968 notchback build thread

    Yeah. That's a 318 mount that had been drilled at some point. I have a about 5 mounts but not the one that came out? Here is the correct NO$ mount installed now.
  13. khuebner250

    When does money outweigh sentimental value? 1968 notchback build thread

    Here's a pro tip! Make sure you use the CORRECT STUPID ENGINE MOUNT BRACKET! I had to buy an NO$ 340 mount. I don't even know where the mount that came out of the car went? It had the correct mounts when I pulled the engine but I put back in a stock 318 mount, whatever.
  14. khuebner250

    When does money outweigh sentimental value? 1968 notchback build thread

    Had this rear it's ugly head. PITA, so I had to make a new fuel line between the EFI inlets.
  15. khuebner250

    When does money outweigh sentimental value? 1968 notchback build thread

    I ended up washing and prepping for ceramic coat. I applied it myself using JaxWax products. Turned out good. Washing Prep spray and remover of all things After ceramic
  16. khuebner250

    When does money outweigh sentimental value? 1968 notchback build thread

    Just a little update. Only got about 200 miles on it. Fixing little things. Still hibernating in the back of the garage at the moment. But I'll recap the last couple months. The EBAY fake battery caps swelled up. Seller sent new ones made out of a new material. No questions asked. So that was nice.
  17. khuebner250

    When does money outweigh sentimental value? 1968 notchback build thread

    Thanks for the kind words. Just got my new Trickflow intake. Gotta get it measured up to make certain I can get the height the same. So there are no issues with the air box. Then drill and tap for the rear crossover coolant ports and add paint. 1. Why Dexcool? Dexcool was a mistake, I made...
  18. khuebner250

    When does money outweigh sentimental value? 1968 notchback build thread

    E Existing at some point. Gotta take some measurements before I start drilling holes in it.
  19. khuebner250

    Shock plate mount with lowered mounting point?

    Are they 1/4" steel and do you think there's enough room to drill and weld shock studs to add the distance needef? And not use double shear mount.
  20. khuebner250

    Shock plate mount with lowered mounting point?

    Does anyone make a shock plate that has a lower than stock mounting stud. I'm running hotchkis spring and would like to gain some shock travel before I blow out my fox shocks. Lmk what you know. Thanks, Keith
  21. khuebner250

    Skunkwürks quarantine 4.0 build

    Here's some before correction pics. I.dont have any afters.
  22. khuebner250

    Skunkwürks quarantine 4.0 build

    I used 5/16 smith bros. This is what I sent michael @ B3. Engine type, SB 414 Cylinder head type, Trickflow 190 The measured distance between the top of the rocker shaft and the valve tip of one intake and one exhaust. (FIG. A) This seems to vary 4 different valves, .277 I, .266 E, .281 E...
  23. khuebner250

    [WANTED] Summit coupon code

    If anyone has one to spare, I'd be greatly appreciated. Thanks, Keith
  24. khuebner250

    Skunkwürks quarantine 4.0 build

    ...and pick up Modded windage tray(due to stud clearance) IJ crank scraper Melling 72HV(used lol) Mopar magnum one piece oil pan gasket MP .557 cam 4* advanced at 106* Rollmaster billet chain MP chain tensioner Flowkooler water pump Side entrance rear freeze plug cooling Trick flow balancer...
  25. khuebner250

    Skunkwürks quarantine 4.0 build

    Get ready to break out the hammer and grinder. Getting the milodon parts to fit is a giant p i t a.
  26. khuebner250

    [Found!] 340 engine brackets 2863445 & 3443

    Looking for drivers side 67-72 Abody 340 engine mount bracket 2863445. Would be interested in a set as well(2863445 & 2863443). NOS is even better. Thanks, Keith
  27. khuebner250

    1968 Barracuda Notch - Plano, TX

    I feel like this is the wrong attitude?
Back
Top