Separate names with a comma.
Nice going, 2 sets of eyes makes all the difference.
Lots of good info. 72nublu has good background info.
I’m a vendor, make and sell many parts into this market. Having a pro touring style Dart for...
I purchased FiTech when they first came out. I wasn’t new to retrofitting efi as I was a DFI dealer in the 90s and even made a stand alone efi kit...
Fitech let their customers do the r and d. I’m not a fan having installed about 8 including their multiport ford and dual quad. Had injector...
My intake was fine
15 initial 30 total
Several have made inquiries about this system. I’ll share my experience after being an early adapter to the FiTech disaster.The PF4 is a great...
Fixed. I slotted the reluctor to change the trigger/rotor relationship. Timing is normal now, lots more power. Rough photo attached before final...
Interesting. The 72 and down linkage actually turns more than the 73 and up.
Better to call or email me to discuss. You’ll be happier dealing with someone who has real experience and owns an A body. I can deliver all parts...
MSD 8421 Rotor Assembly, Adjustable
I have the same engine with same problem!
After carefully checking the ignition, I’ve determined the rotor phasing is off enough to cause the...
Can you post or text pictures of your coupler/shaft/box from under the hood?
If you want to put the factory bar back on, I stock the weld on tabs that look factory only a little thicker steel.
Thanks for the honesty. I'm going to pass on the cap.
PM or text me 516.384.6438. Your box is full.
I use/sell springs from Eaton Detroit. High quality spring with zinc liners.
Mine is a late 71 without ECS. The aftermarket stant cap I have sticks out too much. I assume I need the shallow one that’s unvented.
Looking for a used correct cap for my 71. I believe its the shallow style. PM me if you have.Thanks FABO
If anyone has the column extension for steering wheels requiring 3 stud mounting, please PM me.
very cool. Do you have pictures of this setup?
This is only if you are using rubber bushings.
I prefer power as well. Naturally I like my Borgeson box as the redone stock boxes I had all leaked and really didn’t have the on center feel of a...
It's possible something is wrong with the box. If the joint was bad, the symptom would be in both directions. I had one like this recently.
I run 18x9s all around. I usually run 255 40 18s, 26" tall. I've also run many other combinations. I'll be at the Optima Autocross at the UMI...
This is true. But there are lots of high quality parts on the market we couldn’t dream of 30 years ago.
Thanks. I make my own pivots and delrin bushings...Just looking for a basic inexpensive pair but thank you.
Thanks Dave, sounds good. Any pics? If you have you can text 516.384.6438