Separate names with a comma.
One of the sets of wheels i have done http://i234.photobucket.com/albums/ee87/fast340six/Trailer/polishw2.jpg...
I normaly cut down everything with the ruffer paper. then do the nooks and granies. That way if you hit the paper roll on some part of the easy...
They look like this http://www.caswellplating.com/buffs/cartrolls.html I buy them in bulk of 100 or so eastwood also sells them
Not sure what you mean? tape up the chrome outer rim.Then sand the aluim centers buff them. them use the final white rouge with a freash buff on...
I use my die grinder{air run type not a dremal dremals are crap} I use pre made sand paper rolls. I picked up 4 large boxes on ebay long time ago...
When i hard car striped at RediStrip They used a torch like you use for a roof that was hooked to a large 5 gallon tank. one goy went around with...
I had a real buffer that had long shafts but it was just a 1/4HP one and i burnt it up. Then came the 110 Baldor motor it was the man! But it died...
That one is for the challenger convert if i ever build it,'I have a twin to it under the dart sport{yes i did 2} I have not done anything since...
These were super easy since the casting was so nice to start with barley needed to use the #80 before moveing onto the 180-220 [IMG] [IMG]...
If you look you can see that the case is missing the tabs that are used with a colum shifter since they were not going to be used I stream lined...
[IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG]
I am posting on how to sand and polish Aluminum It is not hard to do but very time consumeing Please keep in mind I am posting as a how to...
I would call John Paceman at USCarTool he probery has pics since he test fitted them to cars before selling them. I now that a guy called...
I have done plenty of polishing on aluim and stainless trim. In fact I consider my self a pro at it. A good friend of mine owns a chrome plating...
You guys do know that acid will take rust off asap? Yes it is not the best thing to fool with but a plastic container filled with PPG DX579 and...
I would just have someone that can blast it cheap do so with a preesure pot and large CFM compressor. I olove my 110 pound pressure pot. Did you...
