Separate names with a comma.
They are, but they get in the way of frame connectors, dual exhaust ,then drive shaft.
I did that on my 64 Barracuda.
Simple,just get a kit off Ebay for the 67-71 Dart from inline tube.
Yea,you know,the thing.
The fuel pressure for that year is I believe 15 psi,1 year system.
I have the same year truck,it gave me problems too.
Possible pick up coil in distributor.
You will need everything from the backing plate out for the 11 inch brakes.
You can buy the appropriate kits( springs,etc.).
Use different pistons.
Taking that much off the heads is a bad idea.
I will take one
So,no matter what wiper switch I have,the motor is the same?
Good to know,still need a motor.
The switch is good.
Wiring is good.
The motor is fried.
I am in need of a variable speed wiper motor for my 64 Barracuda.
The auto parts stores should have the fittings.
It takes a double flare for brake lines.
I will take the washer/wiper switch.
My ever changing truck[ATTACH][ATTACH]
Sounds like it could be in the motor park switching position.
Tractor Supply is a good place to get bolts,decent price, Rural King I believe is even better.
I looked at that option.
Do they leave room for relocated springs and exhaust.
What about fuel filler set up?
I plan on relocating my leaf springs under the frame,but they will hit the gas tank.
I am thinking about removing tire well and putting a...
5.7 according to paperwork.
Are the motor brackets bolted in the correct location on the block?
Both mounts sitting equally on the kframe?
I did the same thing on my 64.
It was cheap and easy.
You can buy exhaust kits and do it yourself.
Depending on size,2.25,2.5,it is not that hard,biggest issue will be around axle and fuel tank, that...
I agree,weld them up.
Redrill what is needed.
Put Doug's on my 64 Barracuda.
Fit great,look great,good ground clearance,no lower than pipes under crossover.[ATTACH]
I think I may have some,I will check this weekend if you can wait.
Have you checked with any auto part stores?
Is the console for sale?
When I redo any auto stuff,I use nutserts/rivet nuts when possible.
Makes for better fastening and grounding.
No ac,but not much in wiring also.[ATTACH]
It is a 904.
So I got the rear end rebuilt and in,drive shaft in,exhaust on.
The original parking brake intermediate cable rubs the exhaust in two places,the...
The wiring goes into the frame in the interior where it is just short of the floor at the firewall so there is just enough space to run some of...