Separate names with a comma.
I learn something every day on this site. Nothing ever surprises me. I never personally saw any 71 Duster 340's with just the dust cloud. But if...
1970 [ATTACH]1971[ATTACH]1972 [ATTACH]
No , It wasn't that car
I have owned many 71 Duster 340's. They all had the "Duster 340" decal on the back. I never saw a 70 - 72 340 Duster without it having the 340 on...
Areas that hide are. 1.feel down the fender well under the hood on the inside of the upper control arm area. If there is rust there that will...
a 340 is not an over bored 318. The 273/318 block is totally different then th 340 and much weaker. Even the core plugs are are relocated. Here...
Its getting there Mike looks great. I don't know if this was brought up but is that the original decal on the rear. Should it be "Duster 340"...
I may have a loner. What side? passenger side or drivers side?
They each only have one place to find them. You'll find them either in lower or upper position.Wonder why they changed that in 1968?
Does it have the hoses coming through the firewall for the foot pump?
Does it have a manual washer pump or electric. That usually tells the story.
Did you all know why the lower wing nut is that large?To make it tight. The spare holds the fuel tank straps from pulling the steel bracket...
Tools have to be in there place or jobs take twice as long. Our giant tool box is full. My son bought a large commercial Garage and 5 1/2 acres....
If you don't organize you can't find anything. And when you do organize You forget where you put things.[ATTACH][ATTACH][ATTACH][ATTACH]...
Buy the sheet metal while you can get it.
That should have been the 340 option on the 340 cars . I always thought the 340's should have had scoops. But they were on the /6 318 cars. this...
If a Duster came with scoops it also came with the grille. 1971 Duster Twister. The DATA plate should have code A51. There are 72 Dusters out...
Glasstek if your buying new.
The scoops were not offered on any Plymouth except 1971 Duster Twister. Slant 6 and 318 cars only. Never offered on any 340 or other plymouths in...
There are two different sets if your car has a 4 or 3 speed hump like in these pictures below. The front carpet will be molded for this hump...
Disconnect the Carburetor to trans linkage at the carburetor . Have someone hold the throttle to the floor inside the car. Loosen the cable...
What are you doing with the Dart rear clip? Your not putting that on the Valiant are you? I have Valiant parts if you need them.[ATTACH]...
Never pays to use old bolts on the rods . Many learned the hard way including myself
My next door neighbor Todd had a 16.5 tire on a thick wagon wheel always going flat. He would air it up with starting fluid. He saw where it was...
My son uses a Serdi styles they are removable multi angle bits. He has up to 6 angle you can go to 7. Also he puts in an under cut. [ATTACH]...
If your a welder you shouldn't have to ask. [MEDIA]
I snapped a 69 440+6 crank right in front of the flywheel in 1974. Hard launch 4spd. Dana 410's 69 Coronet with Race Masters. Put a magnum 4bbl...
I alway install the timing cover first Glue it to the cover then film of sealer on block side . Install the end pan rubber seals dry. Then glue...
I corrected the info on the pictures above. Thanks for correcting me.
Location would be nice.
