Separate names with a comma.
I work in Norco!
Thanks! My house. Yorba Linda.
No vents. I think I'll cut out the front.
Purchase. VFN Fiberglass
Where in Orange County?
Working on the ride height. Had to order 2" drop spindles.[ATTACH]
Started on the front suspension.[ATTACH]
Installed the factory oil cooler and lines. Started on the front suspension.[ATTACH][ATTACH]The lines in the back are for the blower...
Finished the paint work on the engine compartment and firewall. Installed the engine, hopefully for the last time.[ATTACH][ATTACH]
Installed the Quick Performance rear end before it got too hot. Gertz supplied the suspension.[ATTACH][ATTACH][ATTACH]
Rear end assembled.[ATTACH][ATTACH]
Sent out the Quick Performance Brand X rear end for powder coating. Built a jig for the engine stand.[ATTACH]
Very cool!
Making the bracket was my first idea but I'd still need the pulley. Just figured $50 + a $7 bearing was more attractive than spending a day...
Here you go.[ATTACH][ATTACH]
I will take and post some.
Finished the EPAS/Steering column.[ATTACH]
A/C Delete. Could not find a part. Tried a shorter belt but with the power steering delete, the belt hit the tensioner. Bought a used...
Sent the hood to paint. Worked on the wiring/fuse/relay panel. Running relays on just about everything.[ATTACH]
Forgot to post this. I started on my EPAS steering unit. It's a great clean kit. However, like every other hotrod part, it needs to be...
Did the same treatment to the front bumper.[ATTACH][ATTACH]
More rear bumper work.[ATTACH]Welded up and re-hung. 1/4" gap now. Also move it inward 3/4".[ATTACH]
The bumpers on these cars are ill fitted with huge gaps. I cut 5/16" off of each side.[ATTACH][ATTACH][ATTACH]
[ATTACH] Map gas torch, putty knife and aggressive wire brush on a grinder.
I painted the entire underneath of the car. A couple of pics of the fender wells.[ATTACH][ATTACH]
With all of the cutting and modifying I thought it would need some bracing.[ATTACH][ATTACH]
A little grinding and smoothing.[ATTACH]
I needed to modify the trans X member for exhaust clearance.[ATTACH][ATTACH][ATTACH][ATTACH]
I'm going to try and use the stock consol with the Hellcat shifter.[ATTACH][ATTACH][ATTACH] [ATTACH]
