Search results for query: *

I totally agree.

What happens when u unplug the switch? Does the signal flash on the side the brake light is on?R u sure the right bulb is in that socket? Did u change the flasher? Did u try a different signal light switches suggested by omm? Disconnect the white wire from the signal light switch to see if the...

Robert, u need the jack stands under the lower control arms as close to the tire u can get. Kim

Yes, it can. Adjust the brake light switch to see if that fixes your brake light problem. Did u clean any ground wires?

Also there has been many updates thru the years so some transfer plates may only do 1 or 2 years then the factory would change things up so a modification is necessary. Kim

...or on a 4 post drive on hoist. Or put jack stands under the rear diff and front lower control arms. Simply speaking the weight of the car has to be on all 4 wheels/tires.Leaf spring thru bolt is 3/8s diameter U want your pinion to be atleast 3* l power than the rear of the trans. Kim Kim

Put up a wanted ad. Somebody will have 1 here. Kim

Yupper. Should measure approximately 1.5 inches when together. Kim

U cannot fill the torque converter when filling the tranny. The vehicle has to be running in neutral. Kimm

Chevy ran the roller bearing up to 1964. Ford used them up till the quit installing the 9 inch diff in trucks sometimes in the 1980s. The axles all just butted up to the pin in the center that hold the spiders in place. So they minimal side clearance/axle play. Kim

I may have 1 from a valiant. I can look next week if u still need it. Is it cable or linkage operated?

It really. U can probably make it work by drilling extra holes. Kim

Is this a square bore or a TQ style carb?

Yes, sending p/m

Pic 4 are 7inches long. Their for 69 up as what u have for linkage. 66/67/68 have the clip on the end to snap onto the bell crank. They are 9 inches long. U will have to drill the hole to the next size on the kd lever. Also will need the right bell crank. I have that also. Kim

Thanks everyone, damimcooltom nailed it. Kim

It appears @Johnny Mac is too busy to answer this question. Kim

Mike, put that on C bodies only. It will sell fast. Kim

Idk. I didn’t know there was a button for that. Ya, is it on other forums. Idk how I would get it back cause it doesn’t come up anywhere that I can see. Hopefully someone can direct me to it.

Naw, Patty would t do that.

Hopefully u paid with goods and services. Or else your SOL. Kim

This is what I get when I click on the classifieds And these

Doesn’t really help me any for my own ads. I done see any for sale or wanted ads at all.

Hi there, I have no for sale or wanted ads at all. The classifieds icon shows up but when I click on it all it does is send me to our Sponsors forum. Any idea what’s up with that. Thanks. Kim. @Joeychgo. @toolmanmike

Post #2 has your answer. Kim

I think they make a batch of identical engines and dyno test 1 out of let’s say every 100 or so. They certainly don’t test everyone. @Johnny Mac

Congratulations!

Sounds good