Search results for query: *

Any 340 or Mopar Performance electronic distributor and electronic system will work well. New cap, rotor, Taylor Spiro Pro wires , platinum plugs. I'll second having halifaxhops setting up any electronic distributor to high performance specs.

I'd run the 318 manifolds.

920 heads are great. But, I would have them tanked and magnefluxed first. If good, milled .020, mill the intake side .019, probably need to replace the exhaust valves (stainless steel), clean up the bowls, get a competition valve job, brass freeze plugs, and redo the guides, might as well add...

Any 318 small port intake will work. Original 273 intake and Carter AFB works very good, I would think the AVS II would work well also, since you can adjust the secondary air valve. Same goes for a TQ or Quadrajet. Use a 68 up 340 throttle cable bracket. You can even use an original 340/360...

You can still get the windage tray bolts new.

Welcome, Thanks for the pictures!

Waldron's exhaust, aluminized or stainless. Waldron's Exhaust – Car exhaust, truck exhaust, exhaust pipes, mufflers

I believe Smithberg Racing bought out all the Hilborn stuff and knows how they work. Real nice to talk to also. Smithberg Racing | Cylinder Heads & Manifolds

If you press on the small diameter internal part of the main shaft the cam and advance assembly should come off.

Only one I could find offhand. Original 64 A-Body Hurst shifter. Two above the cross over and the reverse goes below. Revers arm points up.

You are going to make me look, May be I can find a picture of the 66.

64 Dart? What mounting plate are you using?

That is not a reluctor. It is the cam to open and close the points. It does not come off separately.

Not as simple as I thought. I got these instructions with a RTE IVR3 solid state voltage limiter. So you need their limiter, or a constant 5V source and the pictured resistor to read full scale. https://rt-eng.com/index.php/RTE_limiter.html

Welcome!

Welcome!

I have it, will get back to you tomorrow.

A Body?

Try it, you'll like it.

Welcome!

I don't blame you. Funny how some things get decided for you.

Sorry, for the misconception to both of you then. I'm not interested in old magazine times or speeds 50+ years a go on glass belted tires. A lot has changed since then. I took it as unbelief that the Road Runner ran what it did.

The short answer is Yes. Rebuilding an engine should be a well thought out process. Most people do not know the capabilities of engines. They simply have not driven them, modded them, driven them all over the country. Either is a good engine that responds to mods. If I am building an engine...

You always need to know what you have. It is not a good idea to rebuild an engine and not bore the block unless you measure the bores and they will clean up with minimum of material removal. It is not like you can run 10:1 compression pistons on pump gas any more. So in either case you will...

So you think a 383 Road Runner 4 speed with headers, slicks, milled heads, rejetted carb, and 4.56 or 4.88 gears will run 15 seconds. Sorry, I believe George. I knew him and there was no BS in him. He was 101 Airborn, he'd give you the straight scoop, just two Mopar guys talking.

No real problem with a cast crank from Chrysler. I only have one cast crank, from a 318 magnum, all the rest are forged. It may never get used, but it might be easier just to use it with the Magnum as a throw together engine.

OK. On a small block 360. I am not really down on them. I built more than a few really good ones for other people, but they are not the be all, end all. If you have one, they are a good starting point. Nothing wrong with them. I personally do not like the external balance, cast crank, and...

Drag racing is an all out burst for say 10-15 seconds. It is hard on everything. When I build something I can't abuse it drag racing. I am a top end guy. I tried 4.10 gears once and it would smoke the tires all the way through 1st and 2nd the half way through 3rd. What was the point? Those...

I'll go with RRR if HP 383 and tuned by him, but few of us would keep it stock. Even my 273 ran a 750 cfm TQ.

I'm not a quarter mile guy. I never paid attention to my friends Road Runner. You know, back in the day anything in the 13's was considered fast. Drag racing is best done with a car set up to only drag race and goes to the track on a trailer. A street car is a whole different car. You can...